SMP King Brachion Clear Color: Build, Pose & Care

Quick Answer

Build your SMP King Brachion (Clear Color Ver) carefully to avoid stress marks on clear plastic, then pose and display it alongside clear Daizyujin and Dragon Caesar for a cohesive translucent Sentai lineup.

Build, Pose & Care Steps

1. Prep Your Tools and Workspace: Use a sharp sprue cutter and a hobby knife. Cut each clear part 1-2 mm from the gate, then sand the nub with fine-grit sandpaper (1000+). Avoid twisting or snapping clear runners—they can crack. Common mistake: cutting too close to the part leaves stress marks. Leave a small nub and sand it down.
2. Assemble the Legs and Body Core: Start with the legs to get familiar with the joint tolerances. Test-fit each polycap before pushing clear parts onto pegs. If a peg feels tight, gently sand it instead of forcing it. Forcing tight pegs into clear plastic can cause white stress lines. Always test-fit first.
3. Attach Clear Armor Panels: Snap on the translucent chest, shoulder, and head pieces. Handle them by the edges to avoid fingerprints. If a panel is loose, apply a tiny drop of clear nail polish to the peg to thicken it. Fingerprints on clear parts are hard to remove. Wear cotton gloves or wash hands thoroughly before handling.
4. Apply Stickers and Painted Parts Last: Place any remaining stickers on clear parts using tweezers. For painted parts (e.g., metallic accents), press gently and avoid repositioning. Once set, let the kit rest for an hour before posing. Repositioning a sticker on clear plastic leaves residue. Align it carefully the first time.
5. Pose Without Over-Stressing Joints: Move each joint slowly to its intended angle. Avoid bending clear armor pieces beyond their natural range. Use the included display stand to support dynamic poses without straining the hips or ankles. Clear plastic joints are more prone to cracking if forced. If a joint feels stuck, check for flashing or debris.
6. Display and Dust-Proof Your Kit: Place King Brachion in a glass cabinet or on a high shelf away from direct sunlight, which can yellow clear plastic over time. Dust with a soft microfiber cloth or compressed air—never use cleaning chemicals. Sunlight accelerates yellowing in clear plastic. Keep the kit out of UV exposure for long-term clarity.

Product Highlight

• SMP King Brachion (Clear Color Ver): The black, yellow, and white parts of the body have been changed to translucent colored versions, and some solid parts now have a metallic look. Some parts have been changed to paint instead of stickers. You get a more premium look with fewer visible sticker edges, but the painted parts need gentle handling to avoid chipping during assembly.